NPTEL Smart Grid Basics to Advanced Technologies Week 10 Assignment Answers 2024

Sanket
By Sanket

NPTEL Smart Grid Basics to Advanced Technologies Week 10 Assignment Answers 2024

1. ______________ transformation converts abc to dq0 reference frame.

  • Park
  • Clarke
  • Inverse Park
  • Inverse Clarke
Answer :- For Answers Click Here 

2. Identify the correct statements

  • An under-excited synchronous generator injects reactive power into the system.
  • An overexcited synchronous generator injects reactive power into the system.
  • Normally excited synchronous generator operates at a leading power factor
  • All are correct
Answer :- For Answers Click Here 

3. Identify the correct statements

  • The battery and supercapacitor are connected to an Isolated DC microgrid through a unidirectional buck-boost converter.
  • The battery is connected to an Isolated DC microgrid through a bidirectional buck-boost converter, not a supercapacitor.
  • The battery and supercapacitor are connected to an Isolated DC microgrid through a bidirectional buck-boost converter.
  • Neither a battery nor a supercapacitor can be connected to an isolated DC microgrid.
Answer :- For Answers Click Here 

4. What is not true in the case of the Isolated mode of operation in the AC microgrid?

  • Grid is not available.
  • The PV will always operate in MPPT condition.
  • Battery either charge/discharge based on the reference command.
  • None of the above
Answer :- 

5. An OLTC is connected between nodes 1 and 2, regulating the voltage at node 2 w.r.t. node 1. The voltage at node 1 is 1 p.u., and the tap position of OLTC is -10. Compute the voltage at node 2.

  • 1.0625
  • 0.9375
  • -10
  • 10
Answer :- 

6. In the steady-state operation of the transmission grid, the voltage magnitudes are regulated in the range of __ p.u.

  • [0.9, 1.05]
  • [0.95, 1.05]
  • [0.95, 1.1]
  • [0.9, 1.1]
Answer :- For Answers Click Here 

7. What is not true in the context of parallel inverter operations?

  • In renewable energy applications, inverters are connected in parallel mainly to increase the generation capacity.
  • Most of the PV and wind plants consist of parallel-operated identical inverters Power sources.
  • In grid-connected mode, all the inverters act as parallel connected current sources.
  • None of the above
Answer :- 

8. Select the correct statement in the context of multi-parallel inverters

  • Common and interactive currents will be unstable if the poles of their characteristic equations lie in the right half of the s-plane.
  • The interactive currents are the ones that flow into the grid.
  • The problem of interactive and common resonance occurs in L-filtered inverters due to their first-order nature.
  • All are incorrect
Answer :- 

9. Select the correct statement

  • Nonlinear loads induce harmonics in the system
  • Harmonics can cause interference with telecommunication lines
  • DVR is a power quality mitigation technique
  • All are correct
Answer :- 

10. For an inverter with an LCL filter to be stable, it is required to ensure the stability of ______________

  • Interactive and common currents
  • Interactive currents
  • Common currents
  • Inverter with an LCL filter is always stable
Answer :- For Answers Click Here 
Share This Article
Leave a comment